 |
Home | Contact | Email | Countries | |||
|
Documents
For the download of technical documentation we ask you for name and e-mail address, downloads from the category information are excluded naturally.
The following documents match your search:
The following documents match your search:
| Application | |||
| 1 |
|
Optimal nutrient ratios for wastewater treatment | |
| Author: Michael Winkler. For observing the legal requirements of treated wastewater, the operator of a wwtp has to manage the wastewater treatment process thoroughly to avoid exceeding the limit values. Among physical and chemical procedures the effluent treatment is based on the biological treatment by the microorganisms of the activated sludge. Therefore good knowledge of nutrient need and composition of the activated sludge is very important for operating at full capacity. Causes, consequences and counteractive measures for unfavourable nutrient ratio are described in this report; 8 pages | |||
| Date: 2008-05-16 |
991 KB
 Download
|
||
|
|||
| 2 |
|
Operational analysis in the metal industry | |
| Lab Scheme.Determination of total heavy metal content, determining the soluble fraction of heavy metal, verifying the analysis results. 1 Page, A4 | |||
| Date: 2006-01-02 |
59.8 KB
Download
|
||
|
|
|||
| Information | |||
| 3 |
|
10 x COD: a COD range for every application | |
| The COD is still one of the most important parameters in waste water analysis. Both for evaluation of (waste) water and for controling of wwtp. This report shows the benefits of LANGE COD cuvette tests such as: - method based on ISO Standard; - minimized consumption of chemicals; - reliable and approved results;- 10 practice-oriented measuring ranges (the customer needn´t dilute his sample); - only marginal amount of work; - high operational safety; - cost-saving method; - free and professional recycling of used reagents in our certified in-house Environmental Center; 4 pager | |||
| Date: 2008-11-06 |
374 KB
Download
|
||
|
|
|||
| 4 |
|
LANGE cuvette test | |
| Produkt Information: LANGE cuvette test, 2 pages with benefits, technical details: IBR, Integrated barcode reader, 10 fold measuremt system; chart of variety of paramters and measuring ranges | |||
| Date: 2006-08-24 |
163 KB
Download
|
||
|
|
|||
| 5 |
|
Colourcode - Cuvettes show their colours | |
| More clarity through colourcoding; uniformly coloured packaging, cuvette labels and caps improve daily operations; new colour system quickly explained; 2 pages | |||
| Date: 2005-02-04 |
128 KB
Download
|
||
|
|
|||
| Working procedure | |||
| 6 |
|
Working procedure LCW 902 sample preparation | |
| digestion of complexed metals | |||
| Date: 2007-08-07 |
70.2 KB
Download
|
||
|
|
|||
| 7 |
|
Working procedure LCK 529 Copper Trace cuvette test 50 mm | |
| Measuring range 0.01 – 1.00 mg/l Cu / 0.012 – 1.200 mg/l Cu (Crack-Set LCW 902) | |||
| Date: 2007-06-01 |
111 KB
Download
|
||
|
|
|||
| 8 |
|
Working procedure LCW 902 sample preparation | |
| digestion of complexed metals | |||
| Date: 2005-10-19 |
70.2 KB
Download
|
||
|
|
|||
| 9 |
|
Working procedure LCK 529 Copper Trace cuvette test 50 mm | |
| Measuring range 0.01 – 1.00 mg/l Cu / 0.012 – 1.200 mg/l Cu (Crack-Set LCW 902) | |||
| Date: 2005-10-17 |
111 KB
Download
|
||
|
|
|||
| 10 |
|
Working procedure LCK 529 Copper Trace cuvette test 50 mm | |
| Measuring range 0.01 – 1.00 mg/l Cu / 0.012 – 1.200 mg/l Cu (Crack-Set LCW 902) | |||
| Date: 2003-05-06 |
109 KB
Download
|
||
|
|
|||
| 11 |
|
Programming instruction for CADAS 100 LPG 158, LCK 529 Copper | |
| Detailed programming steps | |||
| Date: 2002-02-27 |
87.3 KB
Download
|
||
|
|
|||
| 12 |
|
Programming instruction for CADAS 100 LPG>=210, LCK 529 Copper | |
| Detailed programming steps | |||
| Date: 2002-02-27 |
96.9 KB
Download
|
||
|
|
|||
| 13 |
|
Working procedure LCW 902 sample preparation | |
| digestion of complexed metals | |||
| Date: 2001-09-17 |
58.2 KB
Download
|
||
|
|
|||