HACH LANGE   Home | Contact | Email | Countries  
 Cart    Disposal  
Search
Products
Request offer
Information
Downloads
Documents
Software
Safety Data Sheets
Certificate of Analysis
Service
FAQ
Newsletter
Services
Events
Press
All about us
Imprint
Documents
For the download of technical documentation we ask you for name and e-mail address, downloads from the category information are excluded naturally.

The following documents match your search:

Application
1   Optimal nutrient ratios for wastewater treatment
  Author: Michael Winkler. For observing the legal requirements of treated wastewater, the operator of a wwtp has to manage the wastewater treatment process thoroughly to avoid exceeding the limit values. Among physical and chemical procedures the effluent treatment is based on the biological treatment by the microorganisms of the activated sludge. Therefore good knowledge of nutrient need and composition of the activated sludge is very important for operating at full capacity. Causes, consequences and counteractive measures for unfavourable nutrient ratio are described in this report; 8 pages
  Date: 2008-05-16 991 KB PDF Download
2   Application 130 Sample specific blank
  Determination of the sample specific blank
  Date: 2004-10-28 187 KB PDF Download
3   Application 28 Landfill leachate
  Sample preparation and analysis of landfill leachate
  Date: 2004-10-28 129 KB PDF Download
4   Degrees of Degradation – Spotlight on nitrogen (TNb)
  Introduction, legal requirements in Europe and Germany, nitrogen parameters, sampling and preparation, number of measurements, instruments, literature; 4 pages
  Date: 2003-09-01 133 KB PDF Download
5   Optimized Phosphorus Elimination
  The report shows with specific eamples how to find out about Bio-P-Potentals, Phosphate-Precipitation and reasons for disfunction.
  Date: 2000-03-01 76.3 KB PDF Download
FAQ
6   PHOSPAHTE - Total or orthophosphate?
  In order to determine phosphate with the Cuvette Test, the phosphate must be present in the form of orthophosphate. Polyphosphates and organophosphates are determined after they have been converted to orthophosphates by digesting them with peroxodisulfate. After the oxidation, the phosphate is referred to as total phosphate. - LCK349, LCS349, LCK350, LCK049
  Date: 2005-08-02
7   PHOSPHATE - Can the digestion for total phosphate also be carried out in a high-temperature thermostat (HT)?
  Yes. Simply prepare the cuvette for the digestion and heat it for 15 minutes in the standard HT program. - LCK349, LCS349, LCK350
  Date: 2005-08-02
8   PHOSPHATE - What does –P stand for in the formula PO4–P?
  –P stands for phosphorus in the form of phosphate. PO4–P is the quantity of phosphorus that is present in the sample in the form of phosphate (PO4). - LCK349, LCS349, LCK350, LCK049
  Date: 2005-08-01
9   PHOSPHATE - Can PO4–P be converted to PO4 3-?
  Yes. The determination is the same, but the result is expressed in a different form.
Conversion factors F:
PO4 -P * F = PO4 F = 3,066
PO4 * F = PO4-P F = 0,326
PO4 –P * F = P2O5 F = 2,291
P2O5 * F = PO4-P F = 0,436
P2O5 * F = PO4 F = 1,338
  Date: 2005-07-27
Information
10   10 x COD: a COD range for every application
  The COD is still one of the most important parameters in waste water analysis. Both for evaluation of (waste) water and for controling of wwtp. This report shows the benefits of LANGE COD cuvette tests such as: - method based on ISO Standard; - minimized consumption of chemicals; - reliable and approved results;- 10 practice-oriented measuring ranges (the customer needn´t dilute his sample); - only marginal amount of work; - high operational safety; - cost-saving method; - free and professional recycling of used reagents in our certified in-house Environmental Center; 4 pager
  Date: 2008-11-06 374 KB PDF Download
11   LANGE cuvette test
  Produkt Information: LANGE cuvette test, 2 pages with benefits, technical details: IBR, Integrated barcode reader, 10 fold measuremt system; chart of variety of paramters and measuring ranges
  Date: 2006-08-24 163 KB PDF Download
12   Colourcode - Cuvettes show their colours
  More clarity through colourcoding; uniformly coloured packaging, cuvette labels and caps improve daily operations; new colour system quickly explained; 2 pages
  Date: 2005-02-04 128 KB PDF Download
13   HT 200S, High-Temperature Thermostat
  The 15-minute digestion for wastewater analysis: fast and effective; description, advantages, technical data and relevant tests; 2 pages
  Date: 2002-07-15 215 KB PDF Download
Quality data
14   Quality certificate - Technical data for LCK350 - Phosphate cuvette test
  Technical data for LCK350 from calibration as well as detection limit and determination limit.
  Date: 2005-04-27 86.6 KB PDF Download
Working procedure
15   Working procedure LCK 350 Phosphate cuvette test, DosiCap Zip
  Measuring range 2-20 mg/l PO4-P / 6-60 mg/l PO4 / 4.5-45.0 mg/l P2O5
  Date: 2007-06-01 164 KB PDF Download
16   Working procedure LCK 350 Phosphate cuvette test, DosiCap Zip
  Measuring range 2-20 mg/l PO4-P / 6-60 mg/l PO4 / 4.5-45.0 mg/l P2O5
  Date: 2005-10-18 164 KB PDF Download
17   Working procedure LCK 350 Phosphate cuvette test, DosiCap Zip
  Measuring range 2-20 mg/l PO4-P / 6-60 mg/l PO4 / 4.5-45.0 mg/l P2O5
  Date: 2003-10-14 164 KB PDF Download
18   Working procedure LCK 350 Phosphate cuvette test
  Measuring range 2-20 mg/l PO4-P / 6-60 mg/l PO4 / 4.5-45.0 mg/l P2O5
  Date: 2003-07-01 129 KB PDF Download
19   Programming instruction for CADAS 100 LPG 158, LCK 350 Phosphate-Phosphorus
  Detailed programming steps
  Date: 2002-02-21 52.6 KB PDF Download
20   Programming instruction for CADAS 100 LPG>=210, LCK 350 Phosphate-Phosphorus
  Detailed programming steps
  Date: 2002-02-21 77.0 KB PDF Download